SDI(HDTV) tally CVBS intercom Ikegami OCP to fiber converter (JM-EFP-I26)consists of camera fiber optic adapter (TX) and fiber optic base station (RX) , custom-designed for long-distance transmission of Ikegami EFP/ENG live production system, to transmit a 3G/HD-SDI signal from the camera side to the Base Station and 2 reverse CVBS for genlock and TC ,Ikegami OCP,intercom(support clearcom), Tally, The system puts all of the signals needed for Ikegami multi-camera 3G/HD-SDI production onto dual SM/MM fiber.
Power supply:
This product is the battery power supply, the camera fiber optic adapter (TX) hanging on the camcorder via the front A gusset plate , the back hanging battery while power supply to the camera and fiber optic adapter;.
Ikegami OCP to fiber converter (JM-EFP-I26)Features:
Easily pass the Pathological test(extremely harsh environments)
SD, HD, 3G automatic input detection, support 270Mbit / s - 1.48Gbit / s - 3Gbit / s rate, support SMPTE-424M 3Gbps HD-SDI, SMPTE-292M HD-SDI, SMPTE-259M SDI serial digital video signals and DVB-ASI signals
Uncompressed lossless transmission without delay;
More than 10KM transmission distance up to a maximum 80KM over single mode fiber
Aluminum precision manufacturing, the size is about the BP battery size,lightweight and convenient, A-type or V-type with a flexible pinch;
Supports Remote control for Sony cameras etc
Mic level input (with mute function) and amp functions (volume adjustment)
Wide temperature range, low power consumption
Ikegami OCP over fiber system (JM-EFP-I26) Application:
Television studio, mobile studio
EFP Electronic Field Production, major sporting events and large celebrations broadcast live
ENG camera (outdoor photo camcorders) upgraded to a EFP camera.
Remote OB Van/Truck Video Feeds
Broadcast Studio Camera Feeds
SD Routing (Requires Optical Matrix Switch)
Long-Haul Signal Transport
Lecture Hall Projector Connectivity
Medical / Surgical Room Broadcast
Specifications:
General index
| Work Temp | -25°C to 55°C |
| Storage Temp | -40°C to 85°C |
| humidity | 0 ~ 95% (non-condensing) |
| Camera Optic Adaptor |
| Input power | DC 12~19V |
| Power consumption | <10W |
| Net weight | 1kg |
| Appearance size | V-Type the size is 160mm*100mm*44mm |
| Optic Base Station |
| Input power | AC90~240V |
| Power consumption | <10W |
| Net weight | 3kg |
| Appearance size | 19” 1U standard rack mount |
Optical:
| Wavelength | 1310nm / 1550nm / CWDM |
| Output Power | -6~-1dBm |
| Rx sensitivity | <-18dBm |
| Transmission Distance | SM fiber 10+km , MM fiber 300m |
| Optical connector | Dual LC/ST/FC,selectable |
SDI input/output:
| Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
| Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
| Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
| SDI interface | BNC 75 Ohm |
| SDI Channel | 1CH (camera side to base side),1CH(base side to camera side) |
Intercom:
| Camera Optic Adaptor |
| Interface | 5pin XLR(Female) |
| Microphone | Mic inputs with mute and pre-amps |
| Headphone | with volume up or down |
| Optic Base Station |
| Interface | Input:3pin XLR Female , Output: 3pin XLR Male DB9:line level audio input and output |
| Audio | Party line and line level audio |
Tally:
| Camera Optic Adaptor |
| Interface | 4pin Aviation connector |
| Output | wet contact closure |
| LED+,LED- |
| Optic Base Station |
| Interface | DB9(Male) |
Remote:
| Camera Optic Adaptor |
| Interface | 8pin sony’s remote interface |
| Data | RS422 |
| Optic Base Station |
| Interface | DB9(Male) |
| Data | RS422 |
| Product Name | SDI(HDTV) tally CVBS intercom Ikegami OCP to fiber converter |
| Product Model | JM-EFP-I26 |
| SDI Connector | BNC |
| Optical Fiber | Lemo Opto-electronic hybrid cable |
| Power Supply | AC85-260V/50Hz |
| SDI Format | 1)All inputs and outputs are equalized and re-clocked |
| 2)Immune to pathological patterns over the entire link budget and operating temperature range |
| 3)SMPTE 424M-2006, 292, 259 and DVB-ASI compliant |
| 4)Supports embedded audio and data signals |
| 5)Support SDSDI & HDSDI & 3GSDI, Support 270M & 1.485G & 2.97G SDI Video |
| Dimension | TX: V-Lock on camera end, RX: 19" 1U rack mount on base end |
| Working Environment | Working Temperature: 0 ℃~+85 ℃; Relative Humidity: 0 ~ 95% (no cold condensation) |
| Warranty | 2 Years warranty |
| Product description | Compliance: 3G, HD, SD compliance, SMPTE 424M, SMPTE 292M, SMPTE 259M |
| 1 x 3G-HDSDI, forward direction (from tx) |
| 1 x Genlock, Reverse direction |
| 1 x TC,reverse analog signal |
| 1x intercom( microphone audio and headphone in(from TX),party line and line level audio |
| 1xRemote control(Ikegami) |
| 1x Tally (wet contact closure) |
| Rx Dimension: 480 x 250 x 50 (mm) = 19' standard case |
| Grosse weight is about 7kg, |
| Extends distance: over dual SM fiber about 10KM |
| Packing in box: Transmitter x1, Receiver x 1, Power wire x 1, Use mannual x 1 |
| Transmitter ( Camera fiber adaptor ) | Receiver ( Base end ) |
| Shape: V-lock | Shape: 1U Rack mount |
| Video: 1x 3G-HDSDI input, 1x 3G-HDSDI loopput, BNC connector | Video: 2x 3G-HDSDI output, BNC connector |
| TC and Genlock:2x Analog signal output,BNC connector | TCand Genlock:2x Analog signal input,BNC connector |
| Intercom: 1x 5 Pin XLR, female,mic level audio input, | Intercom: 2x 3 Pin XLR, Male and Female, party line |
| Tally: 1x 4 Pin Aviation Connector,wet contact closure, | Tally:1x DB9 Connector,wet contact closure, |
| Remote: Ikegami OCP | Remote: Ikegami OCP |
| Vol Control: Mute, Vol+, Vol-, | |
| Fiber :dual SM/MM fiber | Fiber : dual SM/MM fiber |
| Power supply:DC12V | Power supply : 1x AC 90-240V, |
| LED indicator: TC, Genlock SDI in, , PWR,Mic | LED indicator:TC,SDI in,SDI out,Fiber,PWR
|
Connection diagram:
|
|
SDI(HDTV) tally CVBS intercom Ikegami OCP to fiber converter Images
|
